This is the Wizardhat hardware only set. )If you just need some extra hardware)
This hardware set will work with any base plate or 4-bolt tracked board on the market. This included M8 or M6 base plates and tracks. There is no more need for T-nuts or different sized bolts the Wizardhat will work on any. Also, the way the bolt sticks up through the track on top makes it easy to line up with the base plate.
The Wizardhat hardware only set comes with 4 qty Wizardhat hardware (includes cone nut, t-bolt, and t-slider with a decal.
*Be careful not to over- tighten with the wrench as you will have a lot more leverage than the screwdrivers you have been using.
| Vendor: | Wizard Hat |
|---|---|
| Type: | bolts |
| SKU: | Wizardhatfoilset |
| Weight:: | 0.25 lb |
Stainless Steel M6 Twin Tip Kiteboard Handle Bolts 12mm depth. Works on almost all kiteboard brands. Double check your board...
Stainless Steel Torx M6 Twin Tip Kiteboard Fin Bolts 16mm depth. Set of four bolts. Works on almost all kiteboard...
M8 Brass Hydrofoil Track T-Nuts and Stainless Steel M8 x 30mm Mounting Screws - Set Torx Head Bolts. These are Replacement M8...
Cabrinha Stainless Steel Phillips Head M8 x 25mm Hydrofoil Bolts set of three with Lock Tite. Replace your lost or...
Stainless Steel Torx Head M6 x 30mm Hydrofoil Bolts set of Four. Replace your lost or damaged hydrofoil bolts with...
Foilite - M8 Titanium Hydrofoil Hardware Set - 4 Track Nuts and 4 M8 Bolts These are Replacement M8 Titanuim...
Foilite - M6 Titanium Hydrofoil Hardware Set - 4 Track Nuts and 4 M6 Bolts These are Replacement M6 Titanuim...
M8 Brass Hydrofoil Track T-Nuts and Stainless Steel M8 x 25mm Mounting Screws - Set Torx Head Bolts. These are Replacement M8...
Stainless Steel Phillips Head M6 x 20mm Hydrofoil Bolts set of Four. Typically used for fins on kiteboard decks that...
Stainless Steel Phillips Head M6 x 25mm Hydrofoil Bolts set of Eight. Typically used for fins on kiteboard decks that...
